Components & Accessories

SureFire 12 Volt Actuator

Part #: 51901065

• Controls the main fuel gas to the main burner
• Factory programmed and pre-wired so no adjustment is necessary
• 3-wire termination
• Applications include: pilotless single stage operations, non-venting fuel trains, and flare systems
• Compatible with all SureFire BMS controllers

Specifications

• 12 volts DC
• Duty cycle – 75%
• Torque – 200 in lbs
• Timing – 5 sec/90° closed; 30 sec/90° open
• 1/4” turn with 2 positions
• Visible indicator dome
• Stainless steel full port ball valve with Teflon seal
• Locked rotor amp – 4.2 amps

Certifications

• Class I Groups C & D
• Class II Groups E, F, & G
• Division 1 & 2
• Explosion proof NEMA 7 cast aluminum enclosure

SureFire 1" Solenoid Valve

Part #: 51900605 K

• Fail-closed device
• No adjustment necessary
• Simple termination and installation
• Applications include: pilotless operations, non-venting fuel trains, and flare systems
• Compatible with all SureFire BMS controllers

Specifications

• 12 volts DC
• 4.5 watts, 0.375 amps
• 12 Cv flow
• Full port
• 2-wire termination
• Teflon coated diaphram
• Stainless steel valve

Certifications

• Class I Groups A, B, C & D
• Class II Groups E, F, & G
• Division 1 & 2
• Explosion proof coil

SureFire 2" Solenoid Valve

Part #: 51900608 K

• Fail-closed device
• No adjustment necessary
• Simple termination and installation
• Applications include: pilotless operations, non-venting fuel trains, and flare systems
• Compatible with all SureFire BMS controllers

Specifications

• 12 volts DC
• 4.5 watts, 0.375 amps
• 48 Cv flow
• Full port
• 2-wire termination
• Teflon coated diaphram
• Stainless steel valve

Certifications

• Class I Groups A, B, C & D
• Class II Groups E, F, & G
• Division 1 & 2
• Explosion proof coil

ASCO 0.25" Solenoid Valve

Part #: 51900601

• Fail-closed device
• No adjustment necessary
• Simple termination and installation
• Applications include: direct pilot (#72 orifice) and/or pneumatic valve operation
• Compatible with all SureFire BMS controllers

Specifications

• 12 volts DC
• 0.55 watts
• 0.06 Cv flow
• Orifice size 1/20 inch (0.05")
• 2-wire termination
• Stainless steel valve

Certifications

• Class I, Groups A, B, C & D
• Class II Groups E, F & G
• Division 1 & 2
• Explosion proof coil

Coalescing Filter

Part # 51909050

• Removes 99.97% of particles in the 0.3 to 0.6 micron range
• Absolute removal rating at 0.75 micron level
• 99.98% efficient at removing oil “aerosols” from compressed air

Pressure Switch

Part #: 51901001

• Used normally open or closed for standbys and shutdowns
• 316 SS construction, wetted parts are NACE
• Field Adjustable from 1 psi – 15 psi
• Compatible with all SureFire BMS controllers

Resistance Temperature Detector (RTD)

Contact SureFire for part #

• Detects the process temperature
• Temperature range is 0°F — 850°F
• Simple three wire termination
• Available in: 5”, 6”, 9”, 12”, and 18”
• Compatible with the SureFire BMS-300 and BMS-350 controllers

Thermocouple Type K (T/C)

Contact SureFire for part #

• Temperature range is 32°F — 2400°F
• Simple two wire termination
• Available in 6” and 9”
• Compatible with SureFire BMS-350 controller

Slow Flow Valve

Part #: 51901043

• Reduces the inrush of fuel gas into the diaphragm valve for smooth and reliable ignition
• Required on all pilotless installations when not using an actuator valve
• Recommended for all piloted installations